Spring net

C-Type Retaining Ring (For Bores)

Stainless steel C-type retaining ring for bores. Covers nominal diameters 10 to 60 mm and is used to prevent shaft pull-out.

Spring net

C-Type Retaining Ring (for Shafts)

Stainless steel C-type retaining ring for shaft mounting. Available for nominal diameters 10 to 60 mm, used to prevent parts from slipping off.

Spring net

U-Bolt (Stainless Steel)

Stainless steel U-bolts available in M6, M8, and M10 thread sizes, with applicable pipe diameters of 17.3 to 114.3 mm. Same-day shipping available.

Spring net

Anchor Bolt (Internal Cone Driven Type)

Model: 99-0210

Internal cone driven type anchor bolt. Available in two sizes, M10 and M12. Limited stock item.

Spring net

Inconel X-750 Heat-Resistant Spring

Spring made of nickel-based heat-resistant alloy NCF750. Suitable for environments with operating temperatures up to 450°C.

Spring net

Wedge Lock Washer

A vibration-resistant anti-loosening washer featuring wedge-shaped cam faces and radial teeth.

Spring net

Spiral Spring

Hard-drawn steel wire spiral springs for automotive and motor applications. Maximum torque 1.09 to 12.0 N・m.

Spring net

Usuita Basane

Free-size stainless steel thin leaf spring cut to specified length. Plate thickness 0.2 to 0.8 mm.

Spring net

Urethane Gel (N-30, N-15, N-01)

Three types of ultra-low elasticity urethane gel with different hardness. Used for vibration absorption and product protection. Available in two sizes: 400×400 mm and 200×200 mm.

Spring net

Caster Stopper

Model: 99-0300

Paper caster stopper inserted into casters. Prevents movement of copiers and other equipment during earthquakes. Sold as a set of 2 pieces.

Spring net

Quick Sleeve (Shaft Sleeve)

A stainless steel sleeve that covers grooves worn into shafts by oil seals, allowing repair without re-machining the shaft.

Spring net

Clip Ring

Stainless steel wire retaining ring for shaft diameters of 4 to 16 mm, with same-day shipping available.

Spring net

Sarabane

Carbon steel disc springs with inner diameter 3.2 to 36 mm and outer diameter 6 to 71 mm. Maximum load 22.6 kN.

Spring net

Stainless Precision Pipe

SUS304 precision small-diameter pipe with outer diameters from 0.3 mm to 5.0 mm. Features a smooth, glossy surface and accurate dimensions.

Spring net

Spiraler (Welded Formed Type B)

Welded formed spiraler made of hot-rolled mild steel plate. Handles large sizes with outer diameters of 90 to 425 mm.

Spring net

Spiral (Welded Formed Product, U-Type)

Stainless steel welded formed spiral. Handles outer diameters of 90 to 240 mm.

Spring net

Spiraler (Continuous Formed Product, G-Type Stainless Steel)

G-type stainless steel spiraler blades for outer diameters of 50 to 75 mm. Winding direction is specified as R or L.

Spring net

Spiral (Continuous Formed Product, G-Type Steel Sheet)

Continuously formed spiral made from hot- and cold-rolled steel sheet. Handles outer diameters of 97 to 250 mm.

Spring net

Spiraler (Continuous Forming Type, L-Type)

Large-diameter continuously formed spiraler made from cold-rolled steel sheet. Handles outer diameters of 123 to 314 mm.

Spring net

Spiral (Continuous Forming, M Type)

Stainless steel continuously formed spiral blades. Same-day shipping available, handling M type with outer diameter of 13 to 17 mm.

Spring net

Spiraler (Continuous Formed Product, S-Type SPCC)

Continuously formed spiraler made of cold-rolled steel sheet. Handles outer diameters of 48 to 95 mm.

Spring net

Spiraler (Continuous Forming Type, S-Type Titanium)

Continuously formed titanium spiraler. Offers excellent corrosion resistance and light weight, handling outer diameters of 48 to 74 mm.

Spring net

Spiral Cover

Telescoping dust-proof cover for ball screws and shafts. Compatible with inner diameters of 20 to 50 mm.

Spring net

Spring Antenna

Stainless steel spring antenna with close-contact coil and straight section. For M3 to M10.

Spring net

Spring Separator

A device that automatically separates tangled springs without damaging them. Available in air-operated and motor-driven types. Made to order.

Spring net

Spring Roll Pin

Slotted-type spring roll pin made of SUS420J2. Nominal diameter 1.6 to 6 mm.

Spring net

Spacer

Cylindrical spacer made of electro-galvanized cold-rolled steel sheet. Nominal diameter 3～10 mm.

Spring net

Set Collar

Steel and stainless steel collar for fixing to a shaft. Bore diameter range 6 to 50 mm.

Spring net

Ceramic Spring (Silicon Nitride)

Non-metallic, non-magnetic spring made of silicon nitride. Usable in high temperatures of around 1000℃ and in strong acids.

Spring net

Clock Spring (Free Size)

Carbon tool steel and stainless steel clock springs available with outer diameters of 50 to 112 mm. Strip thickness 0.2 to 0.8 mm.

Spring net

Spring Return Cord Reel Unit

A case-type spring return unit that pulls out a cord and retracts it. Output force 2.45 to 9.8 N.

Spring net

Daruma Pin

Daruma pin made of stainless spring steel wire. Compatible with shaft diameters of 4 to 20 mm, with same-day shipping.

Spring net

Tangless Insert

Stainless steel internal thread insert that can be inserted and removed without a tang, reducing work time with dedicated tools.

Spring net

Titanium Alloy Spring

Compression, tension and torsion springs made from β-type titanium alloy wire. Lightweight with high corrosion resistance.

Spring net

Chip Conveyor Coil

Model: M5101〜M5110

Conveyor coil made of high-manganese carbon steel wire. Outer diameter range 72 to 120 mm; custom lengths available on request.

Spring net

Neodymium Magnet (Neo Magnet)

Nickel-plated neodymium magnets with top-class magnetic properties. Available in round, ring, and square shapes.

Spring net

Torsion Spring

Torsion spring available in right-hand and left-hand winding. Free size options are also supported.

Spring net

Torsion Spring Free Size Standard Type (36-052 to 36-156)

Free-size torsion spring with inner diameter of 5 to 15 mm. Made to order by specifying number of coils and arm length. Orders of 1 to 10 pieces ship in 4 days.

Spring net

Torsion Spring Right-Hand Wound 33-0320

Model: 33-0320

Right-hand wound torsion spring made of stainless steel wire. Inner diameter 3 mm, 2 coils, 90° angle.

Spring net

Torsion Spring, Right-Hand Wound, Inner Diameter 12–18 mm (33-1220 to 33-1848)

Right-hand wound close-coiled torsion spring made of SUS304-WPB. Inner diameter 12–18 mm, 2–5 coils, available in 90°, 135°, and 180° specifications, with same-day shipping support.

Spring net

Torsion Spring Right-Hand Wound, Inner Diameter 7 to 10 mm (33-0720 to 33-1048)

Right-hand wound close-coiled torsion spring made of SUS304-WPB. Inner diameter 7 to 10 mm, 2 to 5 coils, with a wide range of part numbers in combinations of 90°, 135° and 180° arm angles. Same-day shipping available.

Spring net

Torsion Spring, Left-Hand Wound, Inner Diameter 12-18 mm (34-1220 to 34-1848)

Left-hand wound close-coil torsion spring made of SUS304-WPB. Inner diameter 12-18 mm, 2-5 coils, standard angles of 90°, 135° and 180°. Same-day shipping available.

Spring net

Torsion Spring, Left-Hand Wound, Inner Diameter 3–6 mm (34-0320 to 34-0648)

Left-hand wound close-coil torsion spring made of SUS304-WPB. Compact range with inner diameter 3–6 mm, 2–5 coils, and angles of 90°, 135°, and 180°. Same-day shipping available.

Spring net

Torsion Spring, Left-Hand Coil, Inner Diameter 7-10 mm (34-0720 to 34-1048)

Left-hand close-coiled torsion spring made of SUS304-WPB. Available in inner diameters of 7-10 mm, 2-5 coils, and angles of 90°, 135°, and 180°, with same-day shipping support.

Spring net

Torsion Spring Free Size (Bending Type A/B)

Free-size torsion springs of bending type A and B, ordered by specifying dimensions and bending direction.

Spring net

Torsion Spring Free Size (Bend Type C・D)

Free-size torsion spring of bend type C・D, ordered by specifying dimensions and bending direction.

Spring net

Torsion Spring Free Size (Standard Type, Bending Type E/F)

Free-size torsion springs in Standard Type and Bending Type E/F that can be ordered by specifying dimensions and number of coils.

Spring net

Torsion Spring

Compact torsion spring with inner diameter of 8 to 16 mm. Free angles of 90° and 135° are available.

Spring net

Screw-in Extension Spring F7151

Model: F7151

Piano wire extension spring with eyebolts at both ends. Manufactured to specified F dimension.

Spring net

Parts Feeder A Linear Feeder

Linear feeder that conveys workpieces in a straight line. Four models with suitable chute length of 100 to 500 mm.

Spring net

Parts Feeder A Vibratory Body

Vibratory body that aligns and supplies small workpieces. Compatible with bowl diameters of 100 to 270 mm across five models. Made to order; price upon request.

Spring net

Parts Feeder B Vibratory Body

Large vibratory body for automotive parts. Equivalent bowl diameter 120 to 270 mm. Made to order.

Spring net

Hastelloy HC-276 Corrosion-Resistant Spring

Corrosion- and acid-resistant spring made of Ni-based superalloy HC-276. Highly resistant to both oxidizing and reducing atmospheres.

Spring net

Spring Conveyor

Model: R40-B24〜R61-B44

Shaftless conveyor coil made from oil-tempered wire. Can be manufactured up to 75 m in length for long-distance conveying of feed and other materials.

Spring net

Stainless Steel Spring Wire Compression Spring, Outer Diameter 12-14mm

In-stock compression spring made of SUS304. Outer diameter 12-14 mm, wire diameter 1.0-2.0 mm.

Spring net

Stainless Steel Spring Wire Compression Spring, Outer Diameter 15-18mm

Closed-end ground compression spring made of SUS304. Standardized to outer diameter 15-18mm and wire diameter 1.2-2.3mm.

Spring net

Stainless Steel Wire for Springs Compression Spring OD 20-22mm

Closed-end ground compression spring made of SUS304. Standardized to outer diameter 20-22 mm and wire diameter 1.6-2.9 mm.

Spring net

Stainless Steel Wire for Springs Compression Spring Outer Diameter 4.5-5.5mm

In-stock compression spring made of SUS304. Available in numerous specifications with outer diameter 4.5-5.5mm and wire diameter 0.35-0.8mm, with same-day shipping support.

Spring net

Stainless Steel Spring Wire Compression Spring, OD 6–8 mm

In-stock SUS304 compression springs. Standardized to outside diameter 6–8 mm and wire diameter 0.5–1.0 mm.

Spring net

Stainless Steel Wire for Springs Compression Spring OD 9-11mm

In-stock compression spring made of SUS304. Standardized to an outer diameter of 9-11 mm and wire diameter of 0.8-1.6 mm.

Spring net